8 Pieces 2 inch metal hold down brackets and 8 pieces pins, blind brackets blind holder replacements for horizontal blinds shades windows doors

Proper ans simple appearance:
These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well.

Installation procedures:
1 What you need: drill, screwdriver, tape measure, hammer, pencil.
2 If the bottom rail is not fitted with pins, drill a approx. 1/ 2 inch deep 7/ 64 inch or 3/ 32 inch bit in the center to hold pins on both sides of the rail.
3 Punch the pins in.
4 Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil.
5 Screw the bracket to the door.
6 Measure the position of the bracket now screwed to the door and mark on the other side.
7 Then repeat the above steps to install the second bracket.

Specification:
Material: metal

Package includes:
8 x Hold down brackets
8 x Pin bolts

Warm notice:
Slight size errors may exist due to manual measurement.
To avoid choking hazard, please keep the products away from kids under the age of 3.