Related Items

---

• CGA580 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 580 Cylinder Adapter Made of stainless steel 304 (CGA580, SS316L, Length=88.5mm 1pc) KWD 12
• Conical Reducer with ISO-KF Flange KF16 KF25 KF40 KF50 (KF40 to KF25) KWD 10
• bmotiontech 1.5" OD PVC hose adapter to ISO-KF KF40 NW40 flange for DIY PVC vacuum bellow KWD 10
• bmotiontech superior Grade NW16 KF16 Tee 3-Ways Vacuum Adapter, All Ends with KF-16 Flange, Made of Stainless Steel 304, Finely Polished (2Pcs - KF16 equal TEE) KWD 23.500
• bmotiontech over pressure relief valve keeps vacuum chamber below excessive positive pressure < 1.5psig, improved version, One-piece valve body, minimized potential leak (KF25 flange) KWD 21.500
• bmotiontech KF40 flange to Male NPT/MNPT Fitting (ISO-KF KF40 QF40 NW40) (1/2" 0.5 inch MNPT to KF40, Pack of 1 pc) KWD 9.500
• Equal Tee block SS304 with 3 Female NPT FNPT 1/4" 0.25" connections threaded holes, stainless steel 304 forged pipe fittings,1/4" x 1/4" x 1/4" FNPT (2pcs) KWD 11
• bmotiontech KF40 NW40 Standard Stainless Steel Corrugated Bellow Hose Set, vacuum bellow hose with 2X Al clamp / 2X SS Centering Ring / 2X FKM O-Ring (1800mm / ~6ft KF40, thick wall bellow) KWD 18
• Oetiker 15400028 Stainless Steel Hose Clamp with Insert, One Ear, Clamp ID Range 9.5 mm (Closed) - 11.5 mm (Open) (Pack of 5) KWD 4.500
• bmotiontech designed Version A ISO-KF KF25 NW25 Flange Vent Valve, air admittance valve, up to air valve for vacuum chamber (KF25 vent valve) KWD 11
• bmotiontech PTFE 1/2" 0.5" Male NPT to KF25 adapter fittings adapter interface MNPT to KF25 NW25 KWD 8.500
• bmotiontech ISO-K 63 flange (clamp type) to NW25 KF25 flange reducer converter adapter (ISO-K 63 to KF25 reducer) KWD 18.500
• bmotiontech 1-inch Baseplate Feedthrough bulkhead to KF25 flange, this adapter fits 1" Internal diameter vacuum chamber opening or hole KWD 26
• 6603-06-06-06-FG Forged Steel Tee Tube Fitting, 9/16"-18 SAE x 9/16"-18 SAE x 9/16"-18 SAE Thread, 3/8" Female JIC Swivel x 3/8" Female JIC Swivel x 3/8" Male JIC KWD 5.500
• 2" inches MNPT x KF50 Flange Vacuum fittings adapter, Made of SS304, Male NPT KWD 18.500
• bmotiontech Manual Right Angle Valve, Bellow Seal Valve, with ISO-KF KF25 Flange + 2 Sets Aluminum Wing nut Clamps + Centering Rings + FKM O-Rings (KF25 90°Angle Valve) KWD 40.500
• 4pcs 1/2" Female Thread to 1/4" Tube Quick Connect Push Fit KWD 5.500
• ISO-KF NW16 KF16 Flange Ball Valve, Shut Off Valve, Isolation Valve, Good for Vacuum foreline Setup (KF16 Flange) KWD 22
• 2 Spool Hydraulic Control Valve Double Acting Control Monoblock Valve w/Joystick for Tractor Loader, 13 GPM 3600 PSI SAE Ports KWD 26.500
• Homewerks 638 5300X 1/2" SWEAT x 3/8" OD Comp Multi-Turn Angle Shut Off Valve, Chrome w/Extension Tube and Flange, 12 Pack KWD 18.500
• bmoitontech ISO-KF KF16 NW16 Flange to 3/4" OD PVC Hose Adapter for DIY PVC Vacuum Bellow Hose, hose clamp included (Pack of 2) KWD 13.500
• 3/4 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 1pcs, 3/4" or 20mm) KWD 5.500
• LTWFITTING Brass Fitting Coupler 1/4-Inch Hose Barb x 1/2-Inch Female NPT Fuel Water Boat(Pack of 30) KWD 18
• SOLENOID VALVE 5164628 for NEW HOLLAND KWD 61.500
• Liquid Temperature () : -25-120 Water Controller Water Switch 6-380V Sensing Changes for Mechanical Adjustment Pipe Fittings KWD 6.500
• ISO63 ISO-K 63 equal elbow clamp type flange KWD 39.500
• VIBRANT PERFORMANCE S.S. Worm Gear Clamps .75in to 1.50in 10 Pack KWD 5.500
• CGA350 High-Pressure Nipples for Compressed Inert Gas to Male NPT 1/4" MNPT, CGA 350 Cylinder Adapter Made of stainless steel 304 (CGA350, SS304, Length=80mm 1pc) KWD 12
• 1 inches OD Barbed Hose Fitting to KF25 NW25 Flange Hose Barb Adapter (Pack of 2pcs, 1 inches ot 25mm) KWD 9.500
• Tee,Check,Valve KWD 14.500