The 3/4-inch motorized ball valve made of stainless steel with 2-wire automatic return is a valuable utensil for various pipe systems. Both the housing and the shaft of the valve are made of stainless steel. An alternating voltage between 85 and 265 V AC activates the valve. In the initial state the valve is closed, but opens within 6 to 8 seconds when actuated. The built-in limit switches ensure minimal energy consumption. In the event of a power failure, the valve closes automatically. In contrast to many solenoid valves, which are constantly supplied with power when open and can overheat, the energy consumption of this valve is so low that overheating is impossible.
The motor-operated ball valve is equipped with a manual function that allows the valve to be opened or closed manually if necessary. In the event of a power failure, the valve can be operated manually. A position indicator at the top of the actuator helps to identify the current status of the valve.
Specifications:
Size: 3/4”
Material: Stainless Steel
Ball Seat: PTFE
Seal: Silicone Rubber
Close/Open Time: 6-8 Seconds
Voltage: 85-265V AC/DC
Max. power: 5W
Max. torque: 2.5 N m
Max. pressure: 1.0 MPa
Temperature range for flow medium: 0°C to 100°C
Environment Temperature Range: -5°C to 40°C
Housing rating: IP65
Life Expectation: 80,000-100,000 cycles
Thread: NPT
Bore Type: Full
The valve cannot be used in strong acid, strong base, sewage, industrial gas and other media with many impurities.