delivery
1 x receiver
1x remote control with battery (If you need more remotes, please let us know)

Before shipment, we have paired the code, you can directly follow the
wiring diagram to connect, if you do not know how to connect,
you can contact our technicians. We will reply you within 24 hours.

Receiver sensitivity: : -105Db
Working Voltage : dc12-48V
Max Load:10A Relay, have better load less than 5A
Working temperature : -10'C - +60'C
Output way : Momentary. Toggle. Latched is Adjustable by the
Jumper on the Receiver .
Receiver Board Size:68*50*19mm
Case Size:75*58*15mm
Code type :Learning code
About Working way
Momentary: Press and hold -> On; Release -> Off.
Latched: Press -> On; Press other button -> Off.

Set control mode
Momentary: jumper doesn't connect
Latched: jumper in pin L and S.

Learning Code :
(1) Press the learning button for 1 time,the learning indicator
flashes slowly,Then press the transmitter button up (first button
default for forward) ,the learning indicator flash 5 times and OFF,It
mean the first button learning Successfully
(2) Press the learning button for 2 times,the learning indicator
flashes slowly,Then press the transmitter button down (second
button default for forward) ,the learning indicator flash 5 times
and OFF,It mean the second button learning Successfully
(Third button default for stop ,When the jumper set for Latched)

Clear code
Press the learning button on the receiver for 5s,the learning
indicator will flash 3 times and OFF , It mean all the transmitter
code in the receiver have been cleared.