【LAN5160T4 Controller Introduction】The LAN5160T4 control board is a newly researched and developed all-in-one 4-axis drive control board with a control cycle of 2 ms per position and high control accuracy. The maximum single axis output pulse is 300KHz, the maximum subdivision is 256, the maximum current is 6A and the common stepper motors are supported.
【LAN5160T4 CNC control system】LAN5160T4 CNC control system adopts ARM design architecture, ARM complete including communication, code parsing, underlying algorithm and control pulse generation part. The design is reasonable, the control is reliable and the operation is easy.
【LAN5160T4 function】Support mach3 control, and computer communication using Ethernet communication method. Equipped with hand pulse interface, supports serial electronic handwheel.
【Equipped with a 6-axis digital handwheel】With X1/X2/X100 triple gear ratio, optional emergency stop switch for control switch. the all-plastic housing has high insulation strength, which can realize 4 axis (or 6 axis) selection switching. Metal gear, accutate scale, high precision and good texture.
【LAN5160T4 performance parameters ①】maximum output 300KHz per channel; 7 common digital input interfaces; 3 common digital output interfaces; 1 PWM spindle speed output; support 4 channels stepper motor control, single channel maximum 300KHz control pulse output; ARM main control chip.
【LAN5160T4 performance parameters ②】The main control device is 24V powered, the current capacity is not less than 1A; each axis driver supports up to 256 subdivisions; each axis driver supports up to 6A current; the quiescent current, running current and subdivisions of the driver are adjustable, the adjustment position is in the plug-in page of mach3.
【Controller interfaces】In addition to the red power indicator and blue link indicator, the controller wiring area contains a total of Ethernet interfaces, MPG hand pulse interfaces, universal input interfaces, emergency stop input interfaces, spindle control interfaces, relay control interfaces, power supply interfaces, stepper motor interfaces and other interfaces.
RATTMMOTOR 100mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for CNC Router Engraving Milling Spindle Motor
KWD 11.500
-11%
RATTMMOTOR 500W CNC Brushless DC Spindle Motor Kit 48V DC Air Cooled Spindle Motor ER11 12000RPM+500 Watt Brushless Driver Controller+600W DC Switching Power Supply+55mm Spindle Mount for CNC Router
KWD 54.500
RATTMMOTOR 4 Axis CNC USB Mach3 Controller Breakout Board CNC Motion Controller Card Stepper Motor Driver with Cable for CNC Router Engraving Machine, Servo Motor, Stepper Motor
KWD 10.500
-13%
CNCTOPBAOS Nema23 57 Stepper Motor Mount Bracket Support Clamp Aluminium Alloy Mounting Holder for CNC Router Milling Engraving Machine
KWD 3.500
