Parameter Information:
Module Properties: Speed Controller
Input Voltage: AC 110V-120V
Rated Current: 10A
Output Current: Max 15A
Output Power: 0-100 Percent Stepless Adjustable
Operating Methods:
-1- Before use, make sure that the power switch of the controller is in the "OFF" position and turn the speed knob to the "0%" position.
-2- Insert the power cord plug of the controller into the power socket, and insert the power cord plug of the load into the socket of the controller.
-3- Variable speed control: Turn on the power switch to the "on" position. Then adjust the speed knob to low, medium or high speed.
-4- The output voltmeter displays the corresponding voltage value (the load must be connected to adjust the voltage). The higher the voltage, the faster the speed; the lower the voltage, the slower the speed.
-5- During variable speed control, if the rotation speed knob is turned to the "100%" position, it will run at full speed. If the rotation speed knob is turned to the "0%" position, it will be in a stopped state.
-6- After completion, turn off the power switch of the control and press the power switch to the OFF position. Remove the speed control from the power socket. Place of Application:
- This machine can be used for temperature regulation, brightness regulation, speed regulation, and voltage regulation. Temperature adjustment: Resistance heating wire heating tube, electric furnace, etc. Light adjustment: Dimming incandescent lamps, dimmable LED Lamps, HV halogen lamps and Tungsten filament bulbs, etc. Speed adjustment: Fans, exhaust fans, electric drills, angle grinders, etc. Voltage adjustment: Reduce the mains voltage and change the load power.
- Perfect for powering fans, small motors, soldering irons, and other inductive load devices. It can also be used with resistive loads such as kettles and electric heaters.
Note:
- Will not work on soft/slow start voltage regulator and inductive transformer, Ordinary LED lights, household appliances cannot be used.
Package Include:
1 x 110-120V 15A Speed Controller