【CM400 Introduction】CM400 motion control card, support 4-axis linkage interpolation, support one machine multi-card mode, users can use the extended G code to realize multi-card cooperative control. It is widely used in engraving machine, mold machine, machining center, precision engraving machine, automated assembly line equipment and other due fields.
【CM400 Specifications】System architecture: high performance processor + FPGA. Number of linked axes: 4 axis, maximum 1MHz pulse frequency. System power supply: 24V DC. Drive mode: pulse + direction, double pulse. IO: 12 inputs, 8 outputs. Spindle interface: 1 analog 0-10V, multisection speed, pulse. Handwheel interface: 5V, AB phase, 4 axis selection, 3 speed multiplier, 1 emergency stop input. Network interface: 100Mbps EtherNet*1.
【Introduction to control systems with RTCP function】The control system with RTCP function is designed with configuration and has a strong scalability. In addition to supporting macro programming and customized setting of NC function parameters, it also supports 18 types of machine structure forms of 3-axis, 4-axis and 5-axis. It also has powerful toolpath preview and positioning functions, powerful and stable performance.
【Software Feature Pack Specifications】 5-axis tip-following, RTCP tip-following control for bevel machining. Tool magazine customization, support for flying scale tool magazine customization development.CAM processing, support for CAM parameterized processing customization.Modbus bus, support for 485modbus absolute value servo reading customization development. Macro program customization, custom G code, M code and custom probing, etc. Virtual handwheel, Android, Hongmeng APP.
【Customized support function】Support customized G code, support servo spindle, rigid tapping. Support customized function shortcut keys, universal input port can be configured shortcut function keys. Support user deep configuration customization, rapid secondary development of interface, automatic deployment of functional components. Support macro program customization.
【CM400 main advantages①】Supports 3D dynamic machining simulation function. Tool position and G-code can realize two-way positioning. 30,000 lines of super pre-reading processing function, support path forward planning. Tiny line segment wide smooth processing, better surface, good machining surface and high efficiency. Support handwheel guidance, all movements can be guided by handwheel, such as zero search, tool setting, tool magazine and so on. Supports the expansion of disk, in-line tool mag
【Hardware Quick Connect and PC Setup】①The Ethernet port of the controller is connected point-to-point with the computer via an Ethernet cable. ② 24V DC power supply is connected to the 3P power terminal of the controller card. ③ Computer Setup: Set the IP address of the connected computer so that it is in the same network segment as the IP address of the controller card (default is 192.168.1.100). Note: Set the IP address to 192.168.1.x (x is 2-254, except 100).
RATTMMOTOR 100mm CNC Spindle Motor Clamp Mount Bracket with 3pcs Screws for CNC Router Engraving Milling Spindle Motor
KWD 11.500
-11%
RATTMMOTOR 500W CNC Brushless DC Spindle Motor Kit 48V DC Air Cooled Spindle Motor ER11 12000RPM+500 Watt Brushless Driver Controller+600W DC Switching Power Supply+55mm Spindle Mount for CNC Router
KWD 54.500
RATTMMOTOR 4 Axis CNC USB Mach3 Controller Breakout Board CNC Motion Controller Card Stepper Motor Driver with Cable for CNC Router Engraving Machine, Servo Motor, Stepper Motor
KWD 10.500
-13%
CNCTOPBAOS Nema23 57 Stepper Motor Mount Bracket Support Clamp Aluminium Alloy Mounting Holder for CNC Router Milling Engraving Machine
KWD 3.500
