NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.
Description:

Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate and loads in both directions.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.
With small friction and high-limit speed, Deep Groove Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance.
Single-row, pre-lubricated, normal accuracy.

Selection Guide:

Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.

Sealed (Designation SuffixRS/2RS) - Made of sheet steel reinforced (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:

Model: 6003Z

Shield Type: Single Shield

Cage Material: Stamping Steel

Inner Diameter (d): 17mm

Outer Diameter (D): 35mm

Thickness (B): 10mm

Dynamic Load Rating (Cr): 6kN

Static Load Rating (Cor): 3.25kN

Accuracy Class: P0 (ABEC1)

Noise Level: Z2

Number of Pack: 5 Pcs

Weight: 189g