Ball Valves are one of the easiest way to install or replace a shut-off valve into your potable water or hydronic water heating system. The single lever control is easy to operate and rotate after installation, makes it reach the shutoff or work in tight spaces easier, which is flexible and space-saving.
The full-port ball valve allows water to pass through the valve easily and freely, and has a reliable option to quickly close the water supply. Installing new valves or repairing leaking pipes is quick and convenient. When you insert a tube into the fitting , the stainless steel teeth will bite the tube and the special o-ring compresses offer good seal property, which is easy to connect and the pipe can even be twisted after everything is connected. You can easily change the tubing connector direction. Narrow space is also suitable with the push.

Product Features:
1. Inspector friendly; peace of mind
2.Rated up to 200 degrees and 200 psi
3. Integral pipe liner for PEX installations
4. Fits copper tubing, and CTS CPVC and PEX
5. Lead free DZR brass body resistant to corrosion
6. Designed for potable water and radiant heating
7. Approved to be used underground and behind walls without access to panels

CAUTIONS:
1.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint.
2.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage.
3.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage.
4.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.
5.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.