HDMI to Component Converter
This converter is used to connect HDMI source device to YPbPr display or TV.
Component interface identification:
YPbPr: indicates progressive scan color difference output.
Compared with AV and Svideo, color difference is to divide the signal into three primary colors of red, green and blue for input. The three groups of video signals are: the brightness is marked with Y, and the color difference signal after removing the brightness signal from two of the three primary color signals-blue and red-are marked as Pb and Pr, or Cb and Cr, Use green, blue, and red to distinguish the joints of the three lines. If these three lines are inserted incorrectly with each other, the screen may not be displayed, or strange colors may be displayed.
The component interface of the component is an analog interface, which supports the transmission of 480i/ 480p/ 576p/ 720p/ 1080i/ 1080p and other formats of video signals, and does not transmit audio signals.
The interface of LCD TV is divided into input interface and output interface. The input interface is responsible for receiving external video and audio signals, and the output interface is responsible for transmitting video or audio signals.

Notice:
👉Input: HDMI. (Support PC, Xbox, PS3, DVD players, etc.)
👉Output: YPbPr + R/L audio (Support TV, monitors, etc.)
👉Please make your TV has a YPbPr input jack instead of an RCA jack.
👉In order to ensure that the product works as expected, please connect it to the power supply, and you need to set the TV to YPbPr.
👉To use on the PS, you need to set the output mode of the PS.
👉The product has a switch, please adjust the side switch to the "ON" position.
👉Note that the connected signal needs to be turned on normally.
👉The product supports up to 1080P. (4K and 3D are not supported)