All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
3 Modes: ①Motion Mode - Light turns on automatically when motion is detected and off after a preselected time delay; ②D2D Mode - Turns on automatically at dusk and off at dawn; ③Always-on Mode - Stays on all the time until you change the mode
How to Set: ①Motion Mode - Switch the "TIME" knob to "TEST" to check if the light works; It turns on for 4 seconds when motion is detected; Next, switch the "DISTANCE" knob to choose detection distance L/M/H; Finally, switch the "TIME" knob to choose lighting time 1/3/10 minutes; ②D2D Mode - Switch the "DISTANCE" knob to "D2D" and "TIME" knob to 1/3/10; ③Always-on Mode - Switch the "DISTANCE" knob to "D2D" and "TIME" knob to "TEST"
Timing: 1, 3, or 10 minutes in motion mode
Detection Distance: From 19.7 feet to 68.9 feet in motion mode
Easy to Install: It only takes a few minutes to connect the three wires to the corresponding device
Wide Application: Adapts to most wall and eave mount applications like LED lights (max: 200 W), fluorescent lights (max: 200W), tungsten lamp (max: 500W)