Search

Search

M.2 to USB Adapter, 10 Gbps Converter Reader M Key Compatible with M.2 NVMe/SATA(NGFF) SSD Based M Key and B+M Key Support 2242 2260 2280 Size SSD

KWD 6
KWD 6.500
Brand
Flylin
Weight
19 g
– 1 +

Special Features

  • 【Compatible with M.2 NVME】M.2 to USB Adapter, M2 SSD to USB 3.1 Reader Compatible with Both NVMe (PCI-e Channel) & B+M Key (SATA Channel) SSD, it supports M.2 NVME in 2230/2242/2260/2280mm sizes, compatible with M-key(Not for B-Key and B&M-Key). allows adding NVMe or B+M Key M.2 SSD to your PC via USB 3.2/3.1/3.0 Type-A Port at perfect performance.Note: M.2 NGFF, PCI-E AHCI protocol is not supported.
  • 【High Performance】The external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
  • 【Hot-Swappable】This NVME adapter is plug and play, no drivers needed. Simple but powerful! Use the Thermal pads and aluminum alloy heatsinks included in the package to help the SSD better transfer heat.
  • 【Please Note】Please Check to Make Sure Your Drive is M.2 NVMe/SATA SSD. Any B+M Key SSD-based SATA transfer protocol or non-M.2 form factor SSDs CAN NOT BE RECOGNIZED.
  • 【Easy to use】M.2 NVME compatible. easy to install and portable.

Description

Features:
M.2 NVME SSD to USB adapter, no cable required, used as a portable SSD.
High-performance 10Gbps USB 3.1 Gen 2 bridge chip for high-speed retrieval and backup of data.
Applicable to for Samsung 970 Series/960 Series/WD Black/Intel/Crucial NVME SSD.
It can realize the full potential of SSD's high performance.
With this NVME to USB adapter, your computer will not recognize the brand of the actual SSD, so for Samsung SSD, you cannot use the for Samsung Disk Clone software.
This adapter supports various pci-e protocols M.2 nvme SSDs (does not support M.2 nfgg of pci-e AHCI and SATA protocols ), can only be used for NVME hard drives.
Support hot plug and pull, plug and play, no driver required.

Specifications:
Material: PCB
Size: Approx. 11.1 x 2.3 x 0.5cm/4.37 x 0.91 x 0.2inch
Project Type: Adapter Card

Package list:
1 x M.2 NVME To USB Adapter Board

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}