Search

Search

10Pcs IR Infrared Obstacle Avoidance Sensor Module Distance Adjustable Photoelectric Reflection Sensor Module for Smart Car Robot with Dupont Cable

KWD 4
Brand
DAOKAI
Category
Motion Detectors
Weight
50 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • 🔢[Describe]This module has a pair of infrared transmitting and receiving tubes,The launch tube emits infrared rays of a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal).
  • 🔢[Characteristics] The sensor is specially equipped with M3 fixed mounting holes, which is convenient to adjust the direction and fix. It uses a wide voltage LM393 comparator, with clean signal, good waveform, and strong driving ability, exceeding 15mA.
  • 🔢[Adjustable distance] the detection distance of the infrared module is 2 to 30 cm, and the detection angle is 35 degrees, The detection distance can be adjusted by the potentiometer knob, and it can be increased clockwise.
  • 🔢[Application]The sensor module can be widely used in many occasions such as robot obstacle avoidance, obstacle avoidance car, assembly line counting and black and white line tracking.
  • 🔢[Package includes]You will get 10 x Infrared Obstacle Avoidance Sensor Module, 1 x 30pin Female to Male Dupont Cable.

Description

Parameters:
Working voltage: 3~5V DC
Detection distance: 2~30cm (adjustable)
Detection angle: 35°
Output mode: digital TTL level output
Board size: 31x14mm/1.22x0.55in

Instructions for use
Connect VCC (3.3V-5V) and GND, the module power indicator will be on, the transmitter tube emits infrared rays of a certain frequency, when the detection direction encounters an obstacle (reflecting surface), the infrared rays are reflected back and received by the receiver tube. After processing by the receiver circuit, the green indicator light will light up, and the signal output interface will output a digital signal (a low-level signal). The distance of the face receiving tube, etc. The output port OUT of the sensor module can be directly connected to the 1O port of the microcontroller, generally connected to an external interrupt; it can also directly drive a 5V relay.

Package includes:
10 x Infrared Obstacle Avoidance Sensor Module
1 x 30pin Female to Male Dupont Cable

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}