ELUTENG NVMe Base for Raspberry Pi 5 Hat M.2 NVMe to PCIe Adapter Raspberry Pi 5 M.2 PCIe Adapter 2230 2242 2280 SSD Expansion Board M Key Hard Drive PCIe NVMe Adapter for Raspberry Pi 5

KWD 5

All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.

【PCIE to NVME Adapter for Raspberry Pi5】This raspberry pi 5 nvme hat is designed for the latest Raspberry Pi 5 and is limited to M.2 NVMe SSD M keys in size 2230 2242 2280 only. (Excludes Raspberry Pi 5 and NVMe M.2 SSDs etc.).
【PCIe x1 Interface]】The PCIe x1 interface of the raspberry pi 5 m.2 hat supports Gen2 and Gen3 standards, and the NVME SSD capacity is not limited by Raspberry Pi OS.
【5W Direct Power Supply via PCIe FPC Cable】The power supply circuitry on this raspberry pi 5 nvme adapter provides 1.5A of current to the SSD over 3.3V, which fully meets the signaling requirements of PCIe 3.0. The current rating of the SSD is 2.5A-3A, but this is for X4 mode, while Raspberry Pi 5 only supports X1 mode. Therefore, the actual current used will be less than the rated current; power can be supplied directly from the PCIe band of the FPC.
【With LED Indicators】The m.2 PCIe nvme adapter have Power Indicator (PWR) and SSD Operating Status Indicator (ACT) make it easy to check the operating status of the power supply and SSD.
【Package Contents】The PCIe m.2 expansion card have 1x PCIE to NVME Expansion Board 1x PCIe FPC Cable 4x Mounting Screws Note: Raspberry Pi 5, SSD, TF card and power adapter are not included.

Hello,