Specification:
Condition: Brand New
Item Type: Voltage Amplifier Module
Material: Metal
Color: As Pictures ShownModule Size: Approx. 50x50mm/2.0x2.0in
Weight: Approx. 35gModule Power Supply: 5V-24V Is Ok, But It Depends On The Output Of The Baby Distribution Voltage (if The Customer Requires The Output 5v Voltage, Then The Ad62x Series Chip Is About ± 3.8v Power Supply, The Voltage Difference Of Its Own Voltage Stabilizer Chip, So It Is Recommended To Be Higher Than 12v Single Power Supply Is Better).Module Bandwidth: At High Gain, AD620/623 Lower Than 50khz, And At Low Gain, Ad620/623 Is Greater Than 1mhz
Module Input Type: Single-ended Or Differential
The Maximum Amplification Factor Of The Module Is More Than 2000 Times (measured). As The Gain Assembly Leads To Large Fluctuation In The Waveform Band, It Is Recommended To Adopt Multi-stage Amplification For High Gain.
Module Saturation Output Amplitude: Ac Peak Is 10vpp (±5vpp)
Fixed Output Voltage: 5v-10v (default Shipment: 5v)

Module features: the AD620 is a low-cost, high-Accuracy instrument amplifier that requires only an external resistor to set the gain, which ranges from 1 to 10000.
Application Suggestions: 1, this module is suitable for more than hundred microvolt amplifier, in addition it is important to note that although the official manual gives the largest magnification is 10000 times, but the actual use and cannot reach the value, the different frequency and the size of the input amplification effect may be different from the actual magnification to the influence of the gain bandwidth product and supply voltage, the op-amp does not exceed the maximum output of the power supply voltage.

Package List:
1x Voltage Amplifier Module1x Pin Header4x Copper Cylinder Screws 4x Screws