Features:
Output: 5V/9V/12V/15V/20V/28V
Output current: 5A(MAX)
Power: 100W(20V/5A), 140W(28V/5A) Size: 40.7X20X6.1mm

Attentions:
1. The trigger board can't boost buck, it can be induce power module output only.

2. Please know that there are not all USB-C power supplies can support all voltages.
The max support is 28V/5A(140W), the actual output current/power is determined by your fast charging charger and load.

3. If the power supply is not support the requested voltage, it will be provided the next lowest voltage.
(If you want to trigger 12V, but your charger doesn't support 12V, it will automatically fall back to 9V)

4. If you want to use more than 65W, please use the TYPE-C cable with E-mark. (Max current support 5A)

5. Since there's no voltage indicator, it's recommended to use a multimeter to measure the voltage before connecting to the application circuit after adjusting the dip switch.

4* PD3.1 Trigger Board
4* KF301-2pin