All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
-0.96 OLED connects easily using I2C over four lines (power, ground, data, and clock) at address 0x3c. The address is changeable with some soldering, but unless you really need to, dont risk it.
-The actual (7-bit) I2C address of OLED is 0x3C, not 3D, not the (8-bit) address printed on the back of screen said 0x78 or 0x7A. 0x78 is 0x3C left-shifted by 1 bit, which is how i2c addresses are sent on the bus. You must properly define this address in any sketch, or you will not get data sent to the display and may mistake it for being DOA.
-One of the great things about OLED display is that they are by design, light emitting. You can have the displays in total darkness, and you can easily read them. In direct sunlight, they are still can be read, but not recommmended to expose to the sun for extended periods of time.
-This tiny oled display is widely used in DIY projects: Smartwatches, Small weather station, Alarm clock, Computer resource monitor (CPU/GPU utilization percentages, RAM availability, core temperatures) etc.
-There is a removable transparent film on each OLED glass surface for scratch resistant protection until use.
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with WiFi LoRa 32 V2
KWD 10.500
DIYmalls Nextion Enhanced 2.4 inch HMI Display Resistive Touch Screen 5V TFT LCD 320x240 for Arduino ESP32 Board (NX3224K024)
KWD 14
-10%
DIYmalls 1.8" inch TFT LCD Display Screen Module SPI Interface ST7735S 128x160 w/SD Card Slot for Arduino U NO Mega-2560
KWD 4.500
DIYmalls 1.44" inch TFT LCD Display Screen Module 3.3V RGB 65K 128x128 4-Wire SPI ST7735S for Arduino Mega-2560 (Pack of 4)
KWD 6
