Related Items

---

• Luck-Fox Pico Plus M RV1103 Linux Micro Development Board with Pre-Soldered Header, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors with Ethernet Port, 64MB DDR2 KWD 7.500
• Rail-Mount SX1262 LoRa Data Transfer Unit, RS232 / RS485 / RS422 to LoRa, Based on SX1262 Module, up to 5KM Distance Communication, Suitable for Data Acquisition in Industry and Agriculture KWD 12
• 1.54inch e-Paper Module 200x200 E-Ink Display Screen Module for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano, etc. SPI Interface Support Partial Refresh KWD 7.500
• RP2040 Microcontroller Development Board with 1.69inch Touch Round LCD 240x280, Based on Pi RP2040, Dual-core Arm Processor, 16MB Flash,Accelerometer and Gyroscope Sensor, Type-C Connector KWD 12
• DSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Display Cable for Suitable for DSI Display Screens, 22Pin to 15Pin, 500mm/50cm Length KWD 3.500
• Luck-Fox Pico Ultra W RV1106 Linux Micro Development Board, Integrate ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 256MB DDR3L 8GB EMMC, with Onboard W-i-F-i, without POE Module KWD 13
• Luck-Fox Pico Mini M RV1103 Linux Micro Development Board with Pre-Soldered Header, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 64 MB DDR2 (with 128MB Flash) KWD 7
• SX1262 LoRa Data Transfer Kit, RS232/RS485/RS422 to LoRa, Based on SX1262, up to 5KM Distance Communication, Suitable for Data Acquisition in Industry/Agriculture (with Serial Cable + Power Supply) KWD 15
• PCIe to M.2 Adapter with PoE Function Compatible with Raspberry Pi 5, Pi 5 POE HAT M.2-M-Key HAT+ Supports NVMe Protocol M.2 SSD 2230/2242, IEEE 802.3af/at Network Standard with Metal Heatsink KWD 13
• Waveshare 2PCS 2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper for Raspberry Pi 5/4B/3B+/3B/2B/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh KWD 14.500
• PCIe to M.2 4G/5G and USB 3.2 HAT+ for Raspberry Pi 5, PCIe to USB3.2/M.2 Adapter Board Compatible with Pi5 and 4G/5G Modules with M.2 Key B Interface, with 3X USB 3.2 Gen1 Ports, 5G-4IN1-PCB Antenna KWD 18.500
• Active Cooler for Raspberry Pi 5, Combines a Temperature-Controlled Blower Cooling Fan and an Alumium Heatsink and Thermal Pad to Accelerate Heat Dissipation for Raspberry Pi 5 (No Pi Board) KWD 4.500
• CM4 Adapter, Interface Protection Adapter Board for Raspberry Pi Compute Module 4 Lite/eMMC, Physical Protection for Frequent Plugging and Unplugging of CM4 Socket KWD 5.500
• DSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Display Cable for Suitable for DSI Display Screens, 22Pin to 15Pin, 500mm Length KWD 3.500
• Industrial USB TO TTL Converter Board, with Original FT232RNL Better Stability&Compatibility, Embed Resettable Fuse ESD/IO Protection Diodes Compatible with Mac Linux Android WinCE Win7/8/8.1/10/11 KWD 6
• Official CSI FPC Flexible Cable for Raspberry Pi 5, Pi 5 CSI Camera Cable 22Pin to 15Pin, Suitable for Pi 5 Connecting to CSI Camera Modules (500MM/ 50CM Length) KWD 4.500
• ESP32-S3 Ethernet Development Board, 10/100Mbps RJ45 Ethernet Port, 240MHz Dual Core Processor, Onboard Type-C Port & TF Card Slot, Support W-i-F-i & BLE & Ethernet Communication, with POE Module KWD 12
• Serial Bus Servo Driver Board for ST/SC Series Serial Bus Servos Up to 253, Integrate Servo Power Supply and Control Circuit, Support UART and USB Control for Raspberry Pi/Jetson Orin Nano/PC/ ESP32 KWD 4.500
• ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor KWD 5
• Industrial Grade Isolated USB to 8CH RS485 Converter, USB to RS485 Adapter, Support Wall-Mount & Rail-Mount & Stackable Installation, Win11/10/8.1/8/7/Mac/Linux/Android, etc. KWD 19.500
• ESP32-S3 Development Board with 5inch Capacitive Touch Screen 1024 x 600 Pixel, 5-Point Touch LCD Display, 32-Bit LX7 Dual-Core Processor, Support WiFi&Bluetooth with Onboard Antenna (Upgraded Ver ) KWD 20
• PCIe to Gigabit Ethernet and USB 3.2 Gen1 HAT for Raspberry Pi 5, Extend PCIe Interface to 3X High Speed USB 3.2 Gen1 Ports and 1x Gigabit Ethernet Port, Driver-Free, Plug and Play KWD 16
• 2-CH CAN FD HAT 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi 5/ 4B/3B+/3B/Pi Zero W/WH/Pi Zero 2W WH/and Jetson Nano, Support CAN FD, MCP2518FD CAN Controller + CAN Transceiver Chip KWD 22
• 2PCS PoE HAT (F) Compatible with Raspberry Pi 5/Compute Module 5, Pi5 Power Over Ethernet HAT with Metal Heatsink and Onboard Cooling Fan, Supports 802.3af/at Network Standard KWD 21.500
• ESP32-C6-WROOM-1-N8 ESP32-C6 Development Board ESP32 C6 Microcontroller RISC-V 32-bit Single-Core Processor, Integrates W F-i 6, B L E 5 and IEEE 802.15.4, Supports USB and UART Development KWD 5
• 2-CH CAN HAT 2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi 5/4B/3B/2B/Zero/Zero W/Zero WH, MCP2515 + SN65HVD230 Dual Chips Solution,Multi Onboard Protection Circuits KWD 10.500
• M.2 NVME PCIE Case for Raspberry Pi 5, with Dual HDMI Ports, Support Dual 4K Video Output, Aluminum Alloy Case with PCIe to M.2 Board, Support PCIe Extending to M.2 Interface/Booting Pi5 from NVME SSD KWD 14.500
• USB to LoRa Data Transfer Module with Antenna Based On SX1262, Multi-System Compatible, No Driver Required, Suitable for Data Acquisition in Industry and Agriculture (XTAL Crystal Oscillator) KWD 10
• USB to CAN Adapter Board STM32 Chip Solution, CAN Baud Rate 5kbps~1Mbps is Configurable, Compatible with Raspberry Pi Jetson Nano Linux Systems, Support Windows XP/7/8/10/11, Multiple Working Modes KWD 11
• RP2350-Zero Mini Development Board with Pre-Soldered Header, Based On RPi RP2350A Dual-Core & Dual-Architecture Microcontroller, 29 × Multi-Function GPIO Pins Type-C Connector KWD 5.500
• RP2350 Microcontroller Development Board with 1.28inch Round Touch Screen IPS LCD 240×240 Pixels, 65K Color, Based on RPi RP2350, Dual-Core & Dual-Architecture Design Type-C Connector KWD 12