Search

Search

11.26 Inch 440x1920 HDMI Screen LCD Display Monitor Speaker Case for RPI

KWD 25
Brand
ElecLab
Category
Monitors
Weight
423 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • This 11.26 inch display screen is a 440x1920 vertical screen.it can be used for x86 PC and Raspberry Pi or other HDMI signals that can output a resolution of 440x1920.it can rotate to a landscape resolution of 1920x440 on the computer and Raspberry Pi through settings.
  • The external size of the 11.26 inch display screen is 2.6x10.5 inches.Its display area size is 2.3x10 inches.The thickness from LCD to PCB is 0.4 inches.The highest component on the PCB is 0.3 inches.
  • The brightness of the 11.26 inch display can be adjusted through the side brightness potentiometer.(The current is 1A at 10 levels of maximum brightness).Integrate 2x3W speakers (The current of the audio circuit is about 1A at maximum volume).
  • This display driver board has reserved a second LCD screen socket. It can be connected to a second identical LCD screen by upgrading the firmware to achieve the effect of dual-screen simultaneous display and dual-level different display in the future (requires the use of CH341 chip USB converter IIC board). This display driver board also reserves a 6P universal GT9xx capacitive touch interface.
  • The .stl 3D shell printing file and the .dxf acrylic shell cutting file are prepared under the electlab-rpi/7.84_8.8_11.26INCH_HDMI project on github.

Description

Features and Specs
The 11.26" 440*1920 LCD display is an IPS LCD display which connects to the RPI through the HDMI FPC cable.
It has 2x3W speaker socket.
It is compatible with X86 PC and RPI 1 model A+ B+/ PI 2 model B/PI 3 model A+ B B+/PI 4 model B nd 2B.
It is powered by the USB TypeC socket and the RPI is powered by the display.

Package Includes
1 x 11.26" hdmi display
1 x TypeC USB cable
1 x XH2.54 2Pin cable
1 x touch pen
8 x M2.5x4 screw
4 x M2.5x10 screw
1 x HDMI PCB for RPI1,2,3
1 x Micro HDMI PCB for RPI4,5
1 x HDMI FPC Cable
1 x straight screwdriver
2 x Stand + 2 x Stand PCB
1 x user manual

Modify /boot/config.txt
hdmi_force_hotplug=1
hdmi_ignore_edid=0xa5000080
hdmi_group=2
hdmi_mode=87
#7.84 inch 400x1280
#hdmi_timings=400 0 50 30 80 1280 0 10 5 30 0 0 0 60 0 44520000 3
#8.8 inch 480x1920
#hdmi_timings=480 0 30 30 30 1920 0 6 6 6 0 0 0 60 0 66280000 3
#11.26 for pi4
#hdmi_cvt 440 1920 60 6 0 0 0
#11.26 for pi1,2,3
#hdmi_timings=440 0 25 15 40 1920 0 10 5 15 0 0 0 60 0 60840000 3
hdmi_drive=2

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}