HKY USB C to DC Adapter Cable with Adjustable Voltage,Barrel PD Trigger Cable(7.05 ft) with 15 Connector Tips

Compatibility for 5V~28V 10W ~140W HP,Dell,Lenovo,Ace r,Samsung,Asus,Toshiba,Sony and more computers Laptops Notebooks that fit these 15Pcs tips Laptop Adapter Kits

The cable's USB-C male connector has built-in circuitry that tricks your charger into thinking a PD-compatible device is connected.

How to adjust voltage ?
1️⃣ When you connect this cable to your PD USB-C charging block,the screen will display " 5.0 v " ,then you need to Long Press the button untill the " 5.0 " is disappear for Reset

2️⃣ Then short press the button to select the voltage you want (switch the voltage cyclically between 5V/9V/12V/15V/20V/28V ). When the screen displays the voltage you want, please stop pressing the button.

3️⃣ Finally, when the voltage you want flashes 3 times on the screen and then stops flashing, congratulations, you have successfully selected the voltage you want.

When you choose a wrong voltage ,pls Long Press the button untill the wrong voltage was disappear to reset and Repeat the above operation step .

Wide application: For USB-HUB/Mini fan/Notebook/LED Pixel Light/Camera/Tablet/VoIP Phone Router/MP3/Webcam Router/Toy/Bluetooth Speaker/Webcam Router/Recorder/Scanner/DVR/Hard Disk Box/Serato DJ Controller/Home Phone System and more devices;

Does not support bi-directional charging,USB-C input,DC output;

Display: LED display output voltage.

Trigger 6 kinds of voltage output,which is convenient for multiplexing of multiple devices

Attention!!!

1.It must be used with a charger or power bank that support the PD protocols,

2.To supply power to high-power equipment,check that the power of your charger or power bank is greater than the required power supply equipment;

3.When replacing different connector,please cut off the power.