12PCS DC Power Socket 5.5x2.5 Power Supply Cable 5.5x2.5 Six Each DC All Metal Charging Socket Receptacle Suitable for Media Players MP3 Players Audiovisual AV Devices
Durable: high quality metal copper material . Insulation flame retardant, fast conductive
Easy to install: DC tube power plugs are positively and negatively welded for easier use; the longer the side, the shorter the side
Multi-purpose 5.5MM wall mount DC: 5v outlet for 2.5mm power; connects power to your wireless stereo; for low-voltage solar control panels; for laptops, small TVs, and other electronics
Contact resistance: less than or equal to 30 mOhm; Insulation resistance: greater than or equal to 100 mOhm; Withstanding voltage: 50-60Hz, 500.60S; Operating temperature: -40 degrees Celsius +85 degrees Celsius
Suitable for media players, MP3 players, MP4 players, audio-visual equipment, AV equipment, laptops, cell phones, smart phones, PDAs, car stereos, etc.
Description
Color: 5.5 x 2.5 mm LsGoodcare 5 Pack 5.5 x 2.5 MM 5A DC Power Jack Threaded Threaded Mounting Connector Adapter (20 Awg 0.3 sq mm Black Red Wire Leads + 5 Pack Male DC Power Plugs Soldered Power Jack Connector) 5.5 x 2.5mm 5A DC Power Jack Threaded Threaded Connector Adapter Operating temperature range: -30-70 degrees Celsius Rated load: 5A DC30V Contact resistance: less than or equal to 0.03 ohms Insulation resistance: greater than or equal to 100 meters ohm Withstanding voltage: AC 500 V (50 Hz)/min Insertion and extraction force: 3N-20N Life: 6000 times 5.5x2.5mm DC plug specification: Rated voltage: 30V AC, DC Current rating: 1A Contact resistance: less than or equal to 30m ohms Insulation resistance: greater than or equal to 100m ohms Withstanding voltage: 50-60Hz. 500.60S Operating temperature: -40 degrees Celsius +85 degrees Celsius The measurement error of the above information is 0.05-0.2. Suitable for media players, MP3 players, MP4 players, audio-visual equipment, AV equipment, laptops, cell phones, smart phones, PDAs, car stereos, etc. Note: When you solder the center pin, insert the plug plug until the plastic hardens so the insulator doesn't get too much heat to melt quickly.