Overview
1.47inch LCD Display Module, Rounded Corners, 172×320 Resolution, SPI Interface

Features
1.47inch LCD Display Module,Embedded ST7789V3 Driver, Using SPI Bus.Comes with examples for Raspberry Pi, Arduino, STM32, etc.
2.Controlled Via SPI Bus.Supports Controller Boards Like Raspberry Pi/Arduino/STM32

Parameter
Working voltage: 3.3V/5V (please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
Communication interface: SPI
Screen Type: IPS
Control chip: ST7789V3
Resolution: 172(H)RGB x 320(V)
Display size: 17.39 x 32.35 mm
Pixel pitch: 0.0337(H) x 0.1011(V) mm
Product size: 22.0 × 38.5 mm

LCD and the controller
The built-in controller used in this LCD is ST7789V3, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself are
172(H)RGB x 320(V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used.

The LCD supports 12-bit, 16-bit and 18-bit input color formats per pixel, namely RGB444, RGB565, RGB666 three color formats, this demo uses RGB565
color format, which is also a commonly used RGB format

The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.

Package Content
1.47inch LCD Module x1
PH2.0 8PIN cable x1

Note
1.Please contact us if you have any problem .
2.The Raspberry Pi,Arduino,STM32 Board in the photo is NOT included.