All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
-The actual I2C address of this OLED module is 0x3C, not 3D, not the one printed on the back of screen said 0x78 or 0x7A. You must properly define this address in any sketch, or you will not get data sent to the display and may mistake it for being DOA.
-This 0.96 inch OLED screen connects easily using I2C over four lines (power, ground, clock, and data) at address 0x3c. The address is changeable with some soldering, but unless you really need to, don't risk it.
-This tiny 0.96 oled display is widely used in DIY projects: Smartwatches, Small weather station, Alarm clock, Computer resource monitor (CPU/GPU utilization percentages, RAM availability, core temperatures) etc.
-There is a removable transparent film on each OLED glass surface for scratch resistant protection until use.
-Comes with 3x 0.96 oled with pin headers already soldered on, so no soldering required.
DIYmalls 915 ESP32 LoRa OLED Board V3 Type-C SX1262 + 915MHz LoRa Antenna U.FL IPEX to SMA for Arduino IOT LoraWan Gateway, not Compatible with WiFi LoRa 32 V2
KWD 10.500
DIYmalls Nextion Enhanced 2.4 inch HMI Display Resistive Touch Screen 5V TFT LCD 320x240 for Arduino ESP32 Board (NX3224K024)
KWD 14
-10%
DIYmalls 1.8" inch TFT LCD Display Screen Module SPI Interface ST7735S 128x160 w/SD Card Slot for Arduino U NO Mega-2560
KWD 4.500
DIYmalls 1.44" inch TFT LCD Display Screen Module 3.3V RGB 65K 128x128 4-Wire SPI ST7735S for Arduino Mega-2560 (Pack of 4)
KWD 6
