- Shopping, made easy.
- /
- Get the app!
Waveshare 2PCS ESP32-S3 Mini Development Board, Based on ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, Support 2.4GHz Wi-Fi & Bluetooth 5, Onboard 4MB Flash Memory/2MB PSRAM
KWD 8.500
ESP32-S3 Development Board with 1.69inch Touch LCD Display 240×280 Pixels 262K Color, Embedded with ST7789V2 Display Driver and CST816T Capacitive Touch Chip,Supports 2.4GHz Wi-Fi/Bluetooth
KWD 12
Luck-fox Pico Max M RV1106G3 Linux Micro Development Board with Pre-Soldered Header, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors (with 256MB DRAM DDR3L)
KWD 9.500
SX1262 868/915M LoRaWAN HAT SX1262 RF Chip LoRa Module Expansion Board for Raspberry Pi 5/4B/3B+/Pi3B/Pi Zero W WH/Zero 2W, with Magnetic CB Antenna, Suitable for Sub-GHz Band Network(Basic Version)
KWD 9.500
ESP32-S3 RGB LCD Driver Board Comes with 2.1inch Round Touch Screen TFT RGB Display LCD 480×480 Pixels, with 32-bit LX7 Dual-Core Processor, 8MB PSRAM and Flash, Support W-i-F i & Blue-tooth
KWD 16
SC3336 3MP Camera Module with FFC Cable for Luck-Fox Pico Series Boards, 3MP (2304×1296) with High Sensitivity High SNR and Low Light Performance, 98.3° FOV Wide Angle
KWD 6.500
ESP32 Development Board ESP32-C6 Mini Development Board, Based on ESP32-C6FH4 Dual Processors 160MHz Running Frequency 2.4GHz WiFi 6 & Bluetooth 5, Suitable for AIoT
KWD 4.500
SIM7028 NB-IoT HAT with GSM Antenna Onboard 40PIN GPIO Header for Raspberry Pi 5/4B/3B+/3B/2B/Zero/Zero 2W/Jetson Nano,etc, Supports Global Band NB-IoT Communication, 2400bps ~ 460900bps Baudrate
KWD 9.500
Industrial 8-Ch Analog Acquisition Module, 12-bit High-Precision, DC 7~36V Wide Voltage Power Supply, Modbus RTU Protocol,8-CH Current Mode, 0~20mA
KWD 13
Direct Drive Servo Motor Driver Board Compatible with Raspberry Pi 5/Raspberry Pi4B, Integrates ESP32 and Control Circuit, Support 2.4G W-i-F-i, Suitable for DDSM Series Hub Motors
KWD 13
Waveshare POE HAT F for Raspberry Pi 5, Pi5 Power Over Ethernet HAT (POE) with Onboard Cooling Fan and Metal Heatsink, Supports 802.3af/at Network Standard, 40PIN GPIO Stack Header to Add Other HAT
KWD 12
PoE HAT for Raspberry Pi 5, Power Over Ethernet HAT for Raspberry Pi 5, 5V 5A 25W Output, Support IEEE 802.3af/at-Compliant Network Standard, Pi 5 PoE HAT Comes with Raspberry Pi 5 Official Case
KWD 13.500
Multi-Functional All-in-One Mini-Computer Kit Compatible with Raspberry Pi 5, with Aluminum Alloy Case, PCIe to M.2 Board Adapter, Dual 4K Outputs Micro Pi5 HDMI and Type-C Adapter(10 Items)
KWD 14.500
Core1262 LF/HF LoRa Module, SX1262 Chip, Long-Range Communication, Anti-Interference, Suitable for Sub-GHz Band, Quick Connect to Cloud Servers to Build LoRa/LoRaWAN Network,TCXO Crystal Oscillator
KWD 6.500
PCIe to 2-CH M.2 Adapter for Raspberry Pi 5, Support SSD 2230/2242 Dual NVMe Solid State Drives, Pi 5 M.2 HAT HAT+ Standard, Onboard Power Monitoring Chip and EEPROM, High-Speed Reading/Writing
KWD 10
PCIe to 4-CH USB3.2 Gen1 Board for Raspberry Pi 5, Pi 5 PCIe Adapter Up to 5Gbps Transmission Speed, No Driver Required, Plug and Play, Two Power Supply Methods, Side-Mounting to Raspberry Pi 5
KWD 10
Official Raspberry Pi CSI FPC Flexible Cable for Raspberry Pi 5, 22Pin to 15Pin, Suitable to Connect CSI Camera to Raspberry Pi 5 and All Raspberry Pi Zero Models (200mm Length)
KWD 3.500
Luck-Fox Pico Mini RV1103 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 64 MB DDR2, 0.5TOPS, Supports int4, int8 and int16 NPU (without Flash and Header)
KWD 5.500
DSI FPC Flexible Cable for Raspberry Pi 5, Pi5 Display Cable for Suitable for DSI Display Screens, 22Pin to 15Pin, 300mm Length
KWD 3.500
8-CH Ethernet Relay Module (B) with Digital Input, Modbus RTU/Modbus TCP Protocol, Support DC 7~36V Wide Range Power Input and PoE Power Supply, with Various Isolation and Protection Circuits
KWD 24.500
4inch e-Paper HAT+ Spectra 6 Full Color E-ink Display 600×400 Pixel SPI Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Jetson Nano/RDKX3, with HAT+ Standard Driver Board
KWD 30.500
USB TO TTL Converter Serial Cable FT232RNL Chip, with Separated 4pin Header + SH1.0 3PIN Connector for Raspberry Pi 5 Serial Port Debugging Compatible with Linux Android WinCE Win7/8/8.1/10/11
KWD 6
Luck-Fox Pico Ultra RV1106G2 Linux Micro Development Board, Integrates ARM Cortex-A7/RISC-V MCU/NPU/ISP Processors, 8GB eMMC, 128MB DDR3L, 0.5TOPS NPU, with Wire-Less (with Board and PoE Module)
KWD 15.500
3.5inch Capacitive Touch Screen Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero 2W/Pico/Pico W/Pico 2/Pico 2 W/ ESP32 /Ar-duino, IPS Display 320x480 Resolution, SPI and I2C Control Interfaces
KWD 11
Pi Zero WH Package Comes with RaspberryPi Zero W with 40PIN Color-Coded Pre-Soldered GPIO Headers +Mini HDMI to HDMI Adapter +Micro USB OTG Cable, Built-in WiFi and Bluetooth
KWD 12
4inch Capacitive Touch Screen IPS Display 720x720 Pixels, RGB Communication Interface, GT911 Touch Chip, 400cd/m² Brightness, Compatible with Luck-Fox Pico Ultra Development Board
KWD 17
0.71inch Round LCD Display Module 160x160 Resolution SPI Interface 65K Colors IPS Panel Using SPI Bus, Compatible with Raspberry Pi Pico/Pi Pico 2/Pico 2 W/ ESP32
KWD 7.500
Waveshare 2PCS Industrial USB to RS485 Converter Bidirectional Adapter Board, Original CH343G and SP485EEN Chip Onboard TVS/Resettable Fuse Protection Circuits, Transmission Distance up to 1.2km
KWD 9.500
RP2350-One Pico-Like MCU Board 4MB Flash, Based On RP2350A Dual-Core & Dual-Architecture Microcontroller, Onboard PCB Type-A Plug, Plug and Play, No Additional Cables Required
KWD 5.500
2PCS Compatible with Raspberry Pi Pico 2 Microcontroller Board with Pre-Soldered Header, Based on Official RP2350 Chip, Dual-Core & Dual-Architecture Design 4MB Flash (Yellow Header)
KWD 10
