Product parameters

★Input: DC 12V 5A(min)
★Output:
Li-ion 4.2V (250mA/500mA/1000mA/1500mA/2000mA/2500mA/3000mA)*4
Ni-MH 1.48V (250mA/500mA/1000mA)*4
★Discharger Current: 250mA/500mA/750mA ★Size: 165mm (length) * 115mm (width) * 40mm (height)
★For battery: 1.2V Ni-MH / Ni-CD to 3.7V Li- battery.For AA AAA 26650 21700

Instructions for use

●CHARGE: Select the "CHARGE" mode, the charger will automatically distribute the charging current, you can also manually select the charging current through the "CURRENT" button.
●TEST: Press and hold the “MODE” button for 3 seconds to enter the mode selection. Select “TEST” mode and press "current" button to select the desired charging current. The charger will automatically complete the test, this time only need to wait for the test results.
●DISCHARGE and REPAIR: Same operation as TEST.

Note:
■About discharge current:if choice 250mA, then the discharge current is 250mA.
When choosing 500mA or 1000mA, the discharge current is 500mA.
When choosing 1500mA, 2000mA, 2500mA, 3000mA, the discharge current is 750mA.
The discharge current of Ni-MH battery is only 250mA and 500mA.
■ About automatically assigned charging current: The charger will measure the battery resistance and analyze it to automatically allocate the charging current. You can also manually select the charging current through the "CURRENT" button.
■About the test results: Charger tested out of the results for reference only, can not be used as any commercial and other proof. Internal resistance (mR) test results error is relatively large.

Product included:Lii-600 Charger+12V/5A adapter(US)+user manual+Car Cable.

After-sales service
We offer 12 months of quality assurance.