Search

-27%

3pcs Rubber Feet Strips Replacement for Lenovo ThinkBook 15 G2 are ITL /15 G3 ITL ACL /15 G4 IAP for Laptop Bottom Case Nonskid Silicone Bumper Rubber Foot Strips Rubber Feet Mat Pad

KWD 4

Brand
HSSDTECH
Weight
33 g
1 +

Special Features

  • Laptop rubber feet For LENOVO ThinkBook 15 G4 IAP 21DJ
  • Rubber Foot Feet Pad For LENOVO ThinkBook 15 G2 ARE 20VG /ThinkBook 15 G2 ITL 20VE
  • For LENOVO ThinkBook 15 G3 ACL 21A4 /ThinkBook 15 G3 ITL 21A5 Laptop Bottom Case Nonskid Silicone Bumper Rubber Foot Strips Rubber Feet Mat Pad Gray
  • Easy to use: There is adhesive on one side of the rubber strip,The adhesive on the Bumper Feet Strips of the release liner ensures that they are firmly attached to the bottom base of the laptop.Strong slip resistance ,excellent adhesion, and not easy to peel off.The effect is very good!
  • Longe rubber foot strip Length: 29.5 cm (11.61 Inch) Width: 0.5 cm (0.19 Inch) Thickness: 0.5 cm (0.19 Inch) Two short rubber strip: Length: 2.5 cm (0.98 Inch) Width: 0.6 cm ( 0.24 Inch) Thickness: 0.2cm ( 0.08 Inch)

Description

Compatible With LENOVO ThinkBook 15 G2 ARE 20VG
ThinkBook 15 G2 ITL 20VE
ThinkBook 15 G3 ACL 21A4
ThinkBook 15 G3 ITL 21A5
ThinkBook 15 G4 IAP 21DJ

【You will get】Gray One Long Rubber Feet Strip + Gray Two Short Rubber Feet Strips

Product size
Longe rubber foot strip : 29.5 cm (11.61 Inch)
Width: 0.5 cm (0.19 Inch)
Thickness: 0.5 cm (0.19 Inch)

Two short rubber strip:
Length: 2.5 cm (0.98 Inch)
Width: 0.6 cm ( 0.24 Inch)
Thickness: 0.2cm ( 0.08 Inch)

Laptop Rubber Feet Strips Replacement Tutorial :
1. Choose a suitable Rubber Feet Strips Rubber foot pads are more durable and have a longer lifespan. Long service life, not easily detached
2.Remove the old foot Pads Before disassembling the old foot Pads, some tools need to be prepared. You can use a pointed knife or a thin pair of pliers to slowly pry off the old Rubber Feet Strips. Be careful not to forcefully pry open with hard objects to avoid damaging the body. At the same time, it is necessary to clean the back of the machine to ensure that the new foot pads are tightly attached to the bottom 

3.Repalacement new rubber feet strips. Prepare a new laptop Rubber Feet Strips, place it in the same position as the old one, and then slowly press it down. During the installation process, it is necessary to carefully observe the adhesion performance of each foot pad to ensure that it can be firmly adhered at every position. After installation, you can check if the new foot mat matches the body completely. 

Matters needing attention
1.When disassembling and installing, pay attention to gentle handling to avoid damaging the position of the body and screws.
2. Check the model of your laptop to avoid purchasing the wrong Rubber Feet Strips.
3. After installing the new foot mat, clean the machine to ensure better adhesion of the new Rubber Feet Strips.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}