MEIRIYFA OBD OBD2 Power Cable for Dash Camera OBD to Mini USB Right Angle Hardwire Charger 90° Degree Wire Cord,12V-24V to 5V 3A 24 Hours Surveillance/Acc Mode with Switch Button (Mini USB)

MEIRYFA OBD OBD2 to Mini USB Power Cable for Dash Camera is widely compatible with most fuel powered vehicle recorders, GPS, radar, mobile phones, and dash cams; It is not suitable for new energy vehicles with electric and plug-in hybrid power.
The OBD2 Power Cable with ACC mode [press switch "O"]: When the car is turned on and powered on, the OBD line will automatically stop after a 20 minute delay when the car is turned off.
OBD to Mini USB for Dash Cam with constant power mode [press switch "一"]: 24-hour parking monitoring. After the car is turned off, the output ACC signal is turned off, and the positive pole continues to supply power. The recorder enters the time-lapse recording function until the car's battery level drops below 11.6V. After a 5-minute delay, the OBD line automatically stops supplying power!
Low voltage protection: The OBD cable is equipped with an MCU intelligent control chip, which can detect the battery level of the car in real time. When the car battery level drops to the low voltage protection value of the OBD line, the OBD line automatically starts the low voltage protection and turns off the output.
90 ° degree angle design: The USB plug adopts a right angle design, which is very suitable for saving space and connection in narrow spaces. Insert the hard wired cable of this OBD dash cam into the car's OBD connector and ensure that it can supply power to the dash cam, then hide any excess wires for easy installation.

Hello,