Overview
ESP32-S3-Touch-LCD-2.8 is a microcontroller development board with 2.4GHz W-i-F-i and Blue-too-th BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch capacitive touch screen can smoothly run GUI programs such as LVGL.
Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.

1. Equipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
3. Built-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM
4. Onboard 2.8inch capacitive touch display, 240×320 resolution, 262K color.
IPS Display Panel, Excellent display performance, 262K color, wide viewing angle
5. Capacitive 5-point touch, supports touch function with I2C interface, 5-point touch for flexible operation and smooth multi-point UI interaction
6. Supports multiple peripherals, Supports the expansion of multiple peripherals via GPIO, UART, I2C interfaces, etc.
7. Adapting UART, I2C and some IO interfaces, integrates full-speed USB port
8. Onboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.
9. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Provide Online Development Resources /User Manual: bit.ly/3L3bmjQ

Package Content
ESP32-S3-Touch-LCD-2.8 x1
SH1.0 12PIN cable ~100mm x1
SH1.0 4PIN cable ~100mm (2pcs) x1
2030 speaker x1