Related Items

---

• HCJYC Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Black KWD 12.500
• HCJYC Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Transparent Set KWD 12.500
• 5 in 1 Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug - Black and Green Set KWD 16.500
• All in One - Protective Case Set for Flipper Zero & for Wi-Fi Dev Board V1 ESP32-S2, The Most Complete Ultimate Starter Kit Accessories for Flipper Zero - Green KWD 20.500
• 3 in 1 Protection Case Set for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero & WiFi Dev Board - Clear WiFi Case with Blue Soft Case Set KWD 16.500
• Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Orange KWD 8.500
• 3-in-1 Set - GNSS Module Receiver with 2 Pack of Prototyping Boards for Flipper Zero Comes with Silicone Protective Case - Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems KWD 8.500
• Sfera Labs Iono Pi Pi4B 2GB - Raspberry Pi I/O Module - DIN-Rail Case, 4 relays, Analog/Digital Inputs, OC Outputs, TTL I/O, Wiegand, 1-Wire, Real Time Clock (RTC), Secure Element Chip KWD 128.500
• 5 in 1 Protective Case for Flipper Zero & for The Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board with GPIO Dust Plug - Orange Set KWD 12.500
• Raspberry Pi Compute Module 3+ Lite KWD 15.500
• PCIe to 4-CH USB3.2 Gen1 Board for Raspberry Pi 5, PCIe to USB Adapter Up to 5Gbps Speed, No Driver Needed, Plug and Play, Extends 4X USB 3.2 Gen1 Ports to Enable Raspberry Pi 5 up to 8X USB Ports KWD 10
• Waveshare IMX219 Camera Module, Compatible with Raspberry Pi 5, 8MP, MIPI-CSI Interface, 120° FOV, Comes with Pi5 CSI Flexible Cable 200mm, 3280×2464 Resolution KWD 8.500
• Micro GPIO Terminal Block Breakout Board Module GPIO Expansion Board Micro Connector with Screwdriver Dupont Cable DIY kit for Raspberry Pi 4B/3B+/3B/2B KWD 7
• Waveshare BME680 Environmental Sensor, Temperature/Humidity/Barometric Pressure/Gas Detection, Compatible with Arduino/Raspberry Pi/Raspberry Pi Pico/ESP32,etc. 3.3V/5V, I2C / SPI Interface KWD 7.500
• 4 in 1 Protective Case for Flipper Zero Device and Wi-Fi Dev Board V1 ESP32-S2, Cover Set Accessories for Flipper Zero WiFi Dev Board - Black KWD 10
• Wi-Fi Devboard for Flipper Zero, 5 in 1 Wi-Fi Devboard and Accessories Set for Flipper Zero Device KWD 20.500
• 840Pcs 14 Vaules 2-125mm breadboard Jumper Wires kit for arduino Electronic Circuit PCB breadboard DIY KWD 4
• All in One - Protective Case Set for Flipper Zero & for Wi-Fi Dev Board V1 ESP32-S2, The Most Complete Ultimate Starter Kit Accessories for Flipper Zero - Pure Black KWD 12.500
• Protection Case for Flipper Zero Wi-Fi Dev Board V1 ESP32-S2, Accessories Compatible with Flipper Zero WiFi Dev Board - Yellow & Black KWD 8.500
• Nextion Basic Display 5.0'' NX8048T050 5.0inch TFT Resistive Touch Screen Panel 800x480 UART HMI Intelligent LCD Display Module KWD 33
• ESP32-S3 Development Board with 5inch Capacitive Touch Screen 1024 x 600 Pixel, 5-Point Touch LCD Display, 32-Bit LX7 Dual-Core Processor, Support WiFi&Bluetooth with Onboard Antenna (Upgraded Ver ) KWD 20
• Waveshare ESP32-S3 Microcontroller, 2.4GHz Wi-Fi Development Board, 240MHz Dual Core Processor, ESP32-S3-WROOM-1 Module, 16MB Flash, with Pre-soldered Header KWD 8.500
• Fabul 3MP USB Camera Module, 110° Angle of View Mini Web Cam, USB2.0 Webcam Board Module Clearer Industrial Image with OV3660 Sensor for Android, Support Mobile OTG KWD 7
• 12pcs Female Pin Header 2x19 Pins Double Row 2.54mm 0.1" Pitch for ESP32 Module ESP-WROOM-32 ESP32-DevKitC Breakout Borad KWD 4.500
• MDBT42Q-192KV2 Nordic nRF52810 Bluetooth Module BLE BT5.1 BT5.0 BT4.2 FCC IC CE Pre-Certified KWD 3
• Alinan 4pcs Type-C 5A PD Trigger Board, Type-C Male Input PD 5V 9V 12V 15V 20V USB Port Output, Adjustable Voltage Power Trigger Module KWD 7
• Waveshare 1.8inch LCD Display Module 128x160 Pixels with Embedded Controller Communicating via SPI Interface Compatible with Raspberry Pi/Jetson Nano/STM32 KWD 6