Specification:
Condition: Brand New
Item Type: High-Voltage Generator
Material: Plastic
Color: As picture shown
Model: HX-12VDY
Length: Approx. 69.5mm / 2.74in
Diameter: Approx. 33.5mm / 1.32in
Plane Diameter: Approx. 32mm / 1.26in
Input Voltage: 6V-12V
Input Current: 0.5A-1A
Input Line Length: Approx. 25cm/9.8in
High Voltage Type: Pulse DC Type
Output Voltage: About 500KV (Please Pay Attention to Safety when Using)
Output Current: 0.005A
Output Line Length: Approx. 92cm/36.2in
High Voltage Discharge Distance: 1cm-4cm
About Power Supply: Can use single section 3.7V lipo battery or two series connection, such as battery, idle mobile phone battery (remove board, recommended capacity is 2000mAh) or -/-hydrogen battery pack, 6V or 12V - Battery and so on (6V battery can achieve the best effect).

Package List:
1 x High-Voltage Generator

Note:
Precautions for Using the Module:
1. The high-voltage module should avoid being energized when the high-voltage is no-load. Before powering on, the appropriate distance of the high-voltage line end must be adjusted. The arcing distance of the high-voltage line is proportional to the battery voltage and capacity used.
2. Experiment from short to long when testing the arc distance. It is strictly forbidden to exceed the maximum arc distance when energized, because the high voltage energy cannot be released and the module is easily damaged.
3. The power of the module is large, and the internal is not suitable for heat dissipation, so it is not allowed to work for a long time.