Compatible With HP models：

ENVY X360 15-DS Series
15-DS1063CL
15-DS1083CL
15-DR1075CL
15-DR1679CL

ENVY X360 15-DA Series
ENVY X360 15-DB Series
ENVY X360 15-DR Series
ENVY X360 15G-DR Series
ENVY X360 15G-DX Series
ENVY X360 15T-DA Series
ENVY X360 15Q-DS Series
ENVY X360 15T-DB Series

250 G7
255 G7
256 G7

TPN-C135
TPN-C136
Bottom Cover Rubber Feet Size：

Thick:
Length: 31.6 cm(12.44 Inch)
Wide: 0.6 cm(0.236 Inch)
Thickness :0.3cm(0.118 lnch)

Thin:
Length: 31.6 cm(12.44 Inch)
Wide: 0.6 cm(0.236 inch)
Thickness :0.2cm(0.078 Inch)

Please refer to the following steps for installation:

1:Before installation, if the old feet are still adhered to the laptop but have become loose or are no longer flat, you may need to gently pry them up using a sharp knife or thin pliers. Please be careful not to use too hard an object to forcefully pry them off, as this may damage the fuselage .

2:After disassembly, clean the bottom of the laptop with a cleaning cloth to ensure there is no dust or residue .

3: Paste it in place: Peel off the adhesive backing of the foot mats and use them. Make sure you apply enough pressure when pressing down so that the foot pad backing is firmly attached to the bottom of the laptop.