Package List:
1 x External S Meter Display Meters for Yae FT-857/FT-897

FT-857D& FT-897D external header display setting method:
Receive Display Settings
1. press (FUNC) key to enter the setup menu, enable the extended menu.
2. rotate (SELECT) to call up the setup menu item No-061(MTR ARX SEL)
3. rotate (DIAL) to select an external instrument display:
-SIG
-CTR
-VLT
-N / A
-FS: buckle in the instrument 1mA full scale output calibration standard external instruments
-OFF
4. press (FUNC) to save the settings and exit the setup menu.
Emission Display Settings
1. press (FUNC) key to enter the setup menu, enable the extended menu.
2. rotate (SELECT) to call up the setup menu item No-061 (MTR ARX SEL).
3. rotate (DIAL) to select an external instrument display:
-PWR
-ALC
-MOD
-SWR
-VLT
-N / A
-OFF
Calibration method is as follows:
1. press (FUNC) key to enter the setup menu, enable the extended menu.
2. rotate (SELECT) to call up the setup menu item No-060 (MTR ARX SEL).
3. rotate (DIAL) to select FS.
4. with a small flathead screwdriver to adjust the calibration adjustment hole rear, so the header pointer to full scale.
5. the calibration is complete!
If you can not find the numbers 60, 61 menu, is this two radio hidden menu. Long press the F key to open the menu settings, menu set to ON, press the F key to open the exit to save the hidden menu.

Note:
The instrument has been calibrated delivery, but do not preclude the bumps transit results in a static pointer is not , in this case the instrument can be adjusted at the mask-side self-zeroing screws appear black.