Search

HT306 Breakout Leads - Universal Test Lead Set for Auto Diagnostic Oscilliscope, 6 Channel (2.8mm black)

KWD 8
KWD 9

Brand
Samfox
Weight
38 g
1 +

Special Features

  • The 6-way automobile multi-function line (HT306) does not need to be equipped with many special lines for engine diagnosis. Flexible wiring to meet various work needs.
  • The wire is easy to connect to the existing automobile wiring harness, and it is convenient to read the signals of various sensors. Good practicality. easy to use. High efficiency, safety and stability.
  • The breakout lead is connected to the input port of the oscilloscope through the HT30A test line, and the signal at the other end of the 4mm banana line is output. Can greatly reduce the failure rate. Wide range of applications.
  • The Universal Test Lead Set spurs are available in 4 different sizes of connectors: 0.6 mm, 1.5 mm, 2.3 mm and 2.8 mm. Light weight and small size. With reliability and miniaturization, good maintenance and interchangeability.
  • The test lead set allows the oscilloscope to connect to various components in the engine bay without stripping or piercing any insulation and risking damage to the connectors.

Description

Feature:

The 6-channel automobile multi-function wire (HT306) does not need to be equipped with many dedicated wires for engine diagnosis.

The wire is easy to access the existing car wiring harness, and it is convenient to read the signals of various sensors.

Access the oscilloscope input port through the HT30A test line to output the signal from the other end of the 4 mm banana lead.

The branch wire size:2.8 mm.

They allow the oscilloscope to be connected to various components in the engine compartment without stripping or piercing any insulation, and without the risk of damaging the connector.

Specification:

Color : black

Connector size:

Blue: 1.5 mm

Red: 2.3 mm

Black: 2.8mm

Weight: 100 grams

Package Included:

1 x 6 channel general lead wire

Note: It is necessary to switch the 4 mm banana connector to the BNC connector through the HT30A test lead, and then insert the oscilloscope.

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}