SCE66 Needle Roller Bearings 3/8-inch ID 9/16-inch OD 3/8-inch Width Drawn Cup Needle Roller Bearings SCE 66 Bearing

Model: SCE66 (I.D. (Fw)= 3/8", O.D. (D)= 9/16", Width (C)= 3/8")
SCE bearings are open bearings that typically consist of an inner ring, an outer ring and a set of rolling elements. This design makes SCE bearings easier to mount and dismount, suitable for some small mechanical equipment and specific industrial applications.
SCE bearings are mainly used in industrial and mechanical applications as key components to support and reduce friction. They are widely used in a wide range of rotating and reciprocating equipment and mechanical systems.
The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity
Used for blower，sander，craftsman snow blower，lawn tractor，snow thrower and many others

Specification:

Model: SCE66

Drawn Cup Material: Steel

Cage Material: Steel

Needle Roller Material: Chromium Steel (GCr15)

Accuracy: P0

Bore Diameter (Fw): 3/8"

Outside Diameter (D): 9/16"

Width: 3/8"

Construction : Single Row

Number of Pack: 5 Pcs

Description:

-They are compact bearings with high load carrying capacity and stiffness.

-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.

-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.

Note: Use a press or special tool (not a hammer) for installation, as runout may cause local deformation or brittle breakage.

Hello,