Search

Search

Electric Controller LCD Display Kit, 24V 36V 48V 1000W 1500W 30A 3 Mode Sine Controller LCD Display Kit for Electric Scooter 48V 30A Controller

KWD 37
Category
Bicycles
Weight
0.6 kg
– 1 +

Special Features

  • CONTROLLER: 30A sine controller supports Hall mode and no Hall mode, with self learning function. When the motor Hall operates normally, the sine mode is used, and when the motor Hall is damaged, the mode is switched to a square mode without Hall.
  • APPLICABLE MOTOR: Controller LCD display kit is suitable for 24V, 36V, 48V 1000W‑1500W brushless motor with and without Hall. For the modification and replacement of damaged parts of electric bikes, electric scooters, etc. You can modify and use the kit according to your own situation.
  • FAST HEAT DISSIPATION: Aluminum alloy shell of the controller has a groove design, provides fast heat dissipation, well defend the circuit, avoid overheat.
  • PACKAGE INCLUDES: This lithium battery retrofit kit for electric bike includes 30A 3 mode sine controller and EN06 LCD instrument, which can be used alone or in combination.
  • LCD DISPLAY: LCD meter is suitable for 22.2mm handlebars, the housing is made of ABS material, with a clear display interface, providing you with a variety of digital display functions for vehicle control and vehicle status, including riding speed, riding mileage, assist gear, power indicator, fault prompt,etc., facilitating reading data while riding. The buttons are operated quickly and convenient to use.

Description

Spec:
Item Type: Sine Controller LCD Display Kit
Controller Parameters:
Controller Material: Aluminum Alloy
Current: 30 ± 1A
Voltage: DC 24V, 36V, 48V
Speed Setting: 1.1-4.2V
Brake Input: Low level
Applicable Motor: 1000W-1500W
Display Parameters:
Material: ABS, Acrylic
Suitable for Mounting Handlebars: Approx. 22.2mm / 0.87in mm diameter handlebars
Voltage: 24V, 36V, 48V
Instrument Function Description:
Display Functions: Speed display, assist gear display, power indicator, fault prompt, total mileage, single mileage, headlight display

How to Use:
1. Controller connection: Please connect the corresponding equipment according to the interface on the controller wiring diagram
2. Instrument installation: Fix the instrument on the handlebar and adjust the viewing angle. When the vehicle is powered off, connect the instrument connector to the corresponding connector of the controller. Turn on the power supply, the electric vehicle and instrument enter the normal state, and the instrument installation is completed.

PackageList:
1 x Controller
1 x LCD Display
1 x Controller Wiring Diagram
1 x Manual

Notice:
For No. 2 communication protocol used by controllers and instruments.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}