Fitment:
For removing your Ski / Wakeboard / Surf Inboard Prop. Works on 3/4" to 1-1/8" shaft, works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size. Clearance required between propeller hub and strut is 1/4" minimum. (NOTE: Must have dimple in end of shaft to use.)

Design:
1. Jaw opens from maximum of 4.5" to 3.25".
2. Designed to remove 2, 3 and 4 blade propellers on inboard shafts.
3. These tools have fine thread screws to enable a strong pulling force with little effort.
4. The unique rotating screw tip design prevents damage to the end of the drive shaft, and has fine-threaded screws to easily achieve strong tension.
5. Remove even the most stubborn props easily with this industrial strength traditional style prop puller.

Specifications:
For: Ski/Wakeboard/Surf Propellers

Fits 3 or 4 Blade Prop
Designed to pull a 3 or 4 blade inboard ski, wakeboard or surf propeller, this is a must-have tool to keep on board if you want to carry a spare prop.

Fits 1“ and 1-1/8" Shaft
Fits 1“ and 1-1/8" shaft diameters, Works great on tournament ski boats and other inboard with a 1-1/8" maximum shaft size.

Easily Operation
The shaft taper make it extremely difficult to remove the prop when replacing it, but, with this tool, you can simply and quick loosen it, you won't take 15 minutes to do the whole job by following operation guidance.

Packing List:
1*Drive Axle Puller
1*Screw Cap