Specification:
Item Type: Geared Motor
Model: 5840-31ZY
Working Voltage: 12V

Shaft Length: Approx. 15mm / 0.6in
Shaft Diameter: Approx. 8mm / 0.3in
DC motor regulator CW and CCW control
Model: CCM2
Working Voltage: DC 10V-30V
Control Power: 12V x 3A=36W, 24V x 3A=72W, ＞24V, maximum 120W
Rated Current: 3A
Maximum Current: 5A
PWM Pulse Width Adjustment Range: 5%-95%
Potentiometer: value B10K, wire length is approx. 20cm / 7.9in, opening approx. 8mm / 0.3in
Output Voltage: About of the input voltage
Drive: Approx. 74 x 47 x 28mm / 2.9 x 1.9 x 1.1in
Potentiometer is used for speed regulation

Package List:
1 x Motor
1 x Governor
1 x CW and CCW Switch
1 x Knob
1 x Washer
1 x Bracket
4 x Mounting Screw

Note:
1. When soldering is required on the positive and negative motor terminals of the power supply, the temperature of the soldering iron is 340℃±40℃, and the heating time is less than 3s.
2. The maximum bearing capacity of the gear is 70KG, blocking is forbidden, and the motor may be burnt if it is blocked for a long time.
3. When installing the motor, if the screw is too long, it will cause between the motor and the rotor, thereby affecting the characteristics.