Material ASTM 1045,Screws quantity:2 (1/4-20UNCX3/4)
The oxidation blackening treatment applied to the surface of a bushing exhibits excellent rust prevention capability.
which are mainly used for locking the H-type taper pulley and Sheaves
Installation: Insert the bushing into the pulley, aligning the smooth hole of the bushing with the threaded hole of the pulley. When you tighten the bolt on the H-shaped bushing, it will be securely fastened to the shaft. Disassembly: First, remove the two bolts. Align the bolts with the threaded holes of the bushing. When tightening the bolts, the bushing and the pulley will separate.
-5%
NTN Bearing 1310 Double Row Self-Aligning Radial Ball Bearing, Normal Clearance, Standard Cage, 50 mm Bore ID, 110 mm OD, 27 mm Width, Open
KWD 26.500
-18%
30 Sets Thrust Needle Roller Bearings NTA-1220 with Washers 0.75 Inch Bore 1.25 Inch OD 0.14 Inch Width Industrial Bearing with Nice Load Carrying Capacity and Stiffness
KWD 7
uxcell Ball Transfer Bearing Unit 12mm 17Lbs Carbon Steel Bolt-Fixing Type for Transmission Pack of 4
KWD 3.500
The Hillman Group 58114 Radial Bearing, 5/8 X 1-3/8-Inch, 4-Pack
KWD 8.500
