Premium pre taped plastic canvas For Painting and Coverings With Paint Bond Technology Most Flake Resistant Film For Multi-Coat Paint Applications.
Manually taping plastic sheets to your automobile before painting not only takes a lot of time, but is also an immense amount of avoidable effort. Save precious hours while on the job and simplify the painting process with JMI BASIC.
✔️ USAGE INSTRUCTIONS:
Clean surface before applying tape for the best adhesion.
Spread out the tape portion little by little for optimum coverage.
Next, without loosening the tape cut the desired part with scissors.
When peeling off the tape, remove it slowly and gently.
⚠️ PLEASE NOTE:
Test the tape first on an inconspicuous surface before use.
If the attachment is worn, moist, or corroded, the area may float. Please use the film after removing the area.
Unroll to the desired length and cut with scissors before unfolding plastic.
Make sure tape is fully unfolded for maximum coverage.
🔎 PRODUCT SPECIFICATIONS
1. TAPE PORTION:
Temperature use range : 80°C per 30 minutes
Thickness: 0.135 mm
Width: 14 ~ 20 mm
Adhesion to steel (gf / in) : 850 (TDS)
Tension Strength (KgF /in) : 9 (TDS)
Adhesive: Rubber
Material: Paper
2. FILM PORTION
Thickness : 0.5 mil
Material : Plastic
Width: 450 mm ~ 2400 mm