All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
This iBOLT 25mm / 1 inch ball dual VHB Adhesive base is made out of heavy duty composite material and is compatible with all industry standard 1 inch / 25 mm mounting arms. Ball joints are coated in a rubber material. *This product is only the iBOLT 25mm VHB Adhesive base. Other images shown are to show the use of the product.
This heavy-duty mount is ideal for flat surfaces. The adhesive is a very strong VHB and is a permanent mounting solution. To apply the adhesive disk, simply remove the red plastic from the back of the 3M VHB mounting disk, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.)
With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees.
The Ball size is 1 inch (25mm) and is to be used with other industry standard 1 inch (25mm) ball mounts
Air Vent GPS Mount for Garmin | Air Vent GPS Mount GPS Holder Compatible with Nuvi RV Dezl Drive Drivesmart Driveassist and More…
KWD 5.500
iBOLT 38mm / 1.5 inch Ball Composite Universal Marine Electronic Fish Finder Mounting Plate for Industry Standard Dual Ball Socket mounting arms
KWD 7
NEWASHAN Marine GPS Antenna Aerial Replacement for Garmin GPSMAP GDU GNC NavTalk Pilot StreetPilot AIS Boat Ship Navigation Receiver Fishfinder Sounder+26ft Cable TNC Connector+BNC Adapter+Mount Base
KWD 12
iBOLT 25mm / 1 inch Composite Universal Marine Electronic Fish Finder to Composite Rectangular AMPS Pattern Drill Base Dual Ball Mount- Featuring a 3.75-inch Composite 25mm / 1 inch Bizmount Arm
KWD 9.500
