Nitze LIDAR Mounting Kit for DJI Focus Pro LiDAR and DJI Focus Pro Motor - T-D02B
Special Features
- Dedicated Design: Nitze T-D02B mounting kit is designed for DJI Focus Pro LiDAR and DJI Focus Pro Motor
- Height Adjustment: The three 1/4" threaded holes on the NATO rail allow the mounting height adjustment of the 15 mm rod with 1/4" screw as required
- Vertical & Horizontal Adjustment: The vertical adjustment of rod mounting is 150 mm, while the horizontal adjustment is 58 mm
- Mounting Method: Securing the DJI Focus Pro LiDAR via two M3 screws; Attaching the mounting kit to a camera cage or other gears via two 1/4" screws
- Dual-use: The mounting kit also supports you to mount a monitor via a 1/4" screw when you do not mount the DJI Focus Pro LiDAR
{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}
Nitze Komodo Cage for RED Komodo 6K Camera with Built-in NATO Rail, Built-in ARRI Rosettes and Multiple Threaded Holes - T-R02A
KWD 35.500
Nitze XT5 L Bracket for Fujifilm X-T5 Camera with Dual Built-in Arca Swiss Quick Release Plates and 1/4" Locaiting Hole and 1/4" Threaded Holes - T-F05A
KWD 12.500
Nitze Ball Side Handle with 1/4" Screw and Detachable Locating Pins for Camera Cage and Monitor Cage, Locating Pins Side Handle with Different Colored Rubber Rings - PA33D
KWD 12.500
Nitze Ball Side Handle with 3/8" Screw and Detachable Locating Pins for Camera Cage and Monitor Cage, ARRI Locating Side Handle with Different Colored Rubber Rings - PA33E
KWD 12.500
