Easy Wood Tools carbide insert Mini Hollowing Tools are the newest addition to the already awesome line of replaceable carbide insert tools offered by Easy Wood Tools. Mini Hollowers are the perfect tools for making small and delicate ornaments and hollow forms. They allow easy access to areas inside entrance holes as small as 3/8” diameter. The line of Mini Hollowers includes 3 tools: #1 Straight Mini Hollower, #2 45 Degree Mini Hollower and #3 90 Degree Mini Hollower. The #1 Straight Mini Hollower is used to establish the initial hole, begin hollowing the vessel and remove material toward the bottom and sides of the vessel. The #2 45 Degree Mini Hollower is used to create the inside rim by removing material under the entrance hole and to establish the finished side wall thickness. The #3 90 Degree Mini Hollower is used to reach difficult areas inside the entrance hole not accessible with the #2 45 Degree Mini Hollower. Using all 3 tools together in a project will allow creation of an unlimited variety of complex and delicate small hollow forms. Tools have 12” long hard Maple handles with overall lengths of from 14-1/4" to 15". CNC machined stainless steel toolbars are 5/16” square with rounded corners and range in length from 2-3/4” to 3-1/4”. Each tool comes equipped with a Ci5 3/8” diameter negative rake replaceable carbide cutter. Negative rake cutters have been shown to reduce “grabs” and produce a better finished surface on man-made materials, hard exotics and end grain.