The hardware LD2410S is equipped with AloT millimeter wave sensors, high-performance 24 GHz transmitting and receiving antennas, and peripheral circuits; The low-power intelligent human sensing algorithm adopts millimeter wave sensor distance measurement technology and advanced proprietary radar signal processing and low-power control technology of ICL112 chip to achieve precise perception of motion, micro motion, and standing human body.

Equipped with single-chip intelligent millimeter wave sensor SoC and intelligent algorithm firmware
Ultra small sensor size: 20 mm x 20 mm
Load default sensing configuration, plug and play
The 24 GHz ISM frequency band can be certified by FCC, CE, and non commission spectrum regulations Powered by a 3.3V power supply, supporting a wide voltage range of 3.0V to 3.6V
Average working current 0.1 mA @ 1 Hz reporting frequency
Detecting targets for moving, micro moving, and stationary human bodies
Real time reporting of detection results
Provide visualization tools that support configuring detection distance intervals and target disappearance delay times
Support sensing range division, completely shielding any interference outside the interval
Close range 0.2 m induction, no detection blind spots
Motion human body sensing FARTHEST distance 8m
Large detection angle, with a horizontal coverage angle of ± 60 ° during wall mounted installation
Support wall mounted installation
Support IAP online upgrade

Supported frequency band: 24-24.25GHz
Support MAX sweep bandwidth: 0.25GHz
MAX equivalent omnidirectional radiation power: 10dBm
Supply voltage: 3.0-3.6V
Size: 20mm x 20mm
Environmental temperature: -40-85 ℃
Distance detection range (wall mounted, 1.5 meters high): 8m for detecting moving human targets/4m for detecting stationary human targets
Average working current: 0.04-0.6mA
Data refresh cycle: 1-60s