Combo Kit for Aftermarket Radio Installation in Factory Radio Location. Radio Kit, Radio Wire Harness, and Amplified Antenna Adapter. Use this combo when replacing the factory radio with an aftermarket radio- this complete combo will let you install the radio and have it work through factory system. For select vehicles only. Use to add an aftermarket radio to the factory vehicle wiring. Standard wire coloring usually will connect color for color to aftermarket radio's wire harness. Plug and play into factory wiring. Black color radio kit. Designed specifically for the installation of Double-DIN radios. High-grade ABS plastic . Contoured textured and painted to compliment factory dash. Antenna adapter with amplified antenna signal retention. Important Compatibility Notes: Will require you to run a separate 12 volt ignition power wire to the new radio's factory wire harness since that wire is not available on the factory harness. As long as you know how to locate and connect that wire then you will save some money- if you don't know how to connect then we don't recommend this harness and you should purchase the harness that is about $40+ more that has built in adapter for that wire turn on. Will not retain some features that go through the radio like factory rear dvd, aux input, backup camera, steering audio controls, etc. . Might not retain warning chimes for Ram vehicles. Requires cutting in back of dash area. Compatible Vehicles: Chrysler: 2015-2016 200 LX with 3 inch screen; Jeep: 2014-2016 Cherokee Sport (No 5" screen vehicles); Ram: 2013-2018 1500/2500/3500- not compatible with vehicles that came equipped with 5" or 8.4" Touchscreen radios, 2019-2020 1500 (classic body style only)- not compatible with vehicles that came equipped with 5" or 8.4" Touchscreen radios, 2013-2018 Chassis Cab- not compatible with vehicles that came equipped with 5" or 8.4" Touchscreen radios, 2016-2018 ProMaster- for vehicles with the factory 3 inch display radio only,.