All electronics ship with US style plugs.You may need a voltage converter or a plug adapter.
Special Features
Part Number: Raspberry Pi Debug Probe
Original USB Debug Probe for Raspberry Pi Pico, Hardware debug kit designed for Pico, Based on RP2040 Microcontroller, With transparent plastic case
Raspberry Pi Debug Probe is an official USB hardware debugger designed for Pico, all-in-one design, with the features of solderless and plug-and-play, can be connected to the debug interface of the target board via SWD interface.
This makes it easy to use a Raspberry Pi Pico on non-Raspberry Pi platforms such as Windows, Mac, and “normal” Linux computers, where you don't have a GPIO header to connect directly to the Pico's serial UART or SWD port.
Onboard Micro-USB port for connecting to PC or other motherboards. Onboard 3PIN SWD interface for connecting to the target board. Onboard 3PIN USB to UART bridge
Standard CMSIS-DAP interface, compatible with most ARM-based microcontrollers. Works with OpenOCD and other tools supporting CMSIS-DAP. Follows the Raspberry Pi 3PIN Debug Connector Specification
Included with the Debug Probe is a USB power cable and three debug cables: 3-pin JST connector to 3-pin JST connector cable; 3-pin JST connector to 0.1-inch header (female); 3-pin JST connector to 0.1-inch header (male). The two 0.1-inch header cables — intended for breadboard (male) or direct connection to a board with header pins (female).
Description
Overview
Original USB Debug Probe for Raspberry Pi Pico, Hardware debug kit designed for Pico, Based on RP2040 Microcontroller, With transparent plastic case
Package Contains
Raspberry Pi Debug Probe x1
For more resources you may need, pls contact me via Amazon message, i will send you then via attachment.