200W/400W Dog House Heater with a Thermostat
You are able to take control and adjust the temperature that is just good for your precious pets.

Different from other ordinary dog house heaters, we have considered everything you need, 400W fast heating, and a thermostat is also included. It directly saves you the trouble of configuring a temperature controller.

The dog house heater is built with PTC heating element, which is safer and faster than the heating lamp. It saves electricity bills, and at the same time, there is no harsh that can hurt the eyes of pets, and there is no fire hazard.

Specification:
Product Model: HT005-02
Rated Voltage: 120V
Rated Frequency: 60Hz
Rated Power: 400W(high grade I1)200W (low grade l)
Noise Level: ≤45dB
Dimensions: (Length x Width x Height) 6.7 x 6.3 x 4.7 inch/ 170 x 160 x 119mm
Applicable Environment: 14-95F(-10-35℃), relative humidity less than 85 percent(at 25℃)

Note:
·Properly cover the dog door with a curtain, and you can keep the house warm. (especially necessary when it is particularly cold, but do not completely seal, pay attention to still having ventilation gaps)These 2 suggestions can effectively reduce energy loss and save electricity expenses.
·Refer to the 'Installation Instructions' for proper placement.
·To use this machine, you must use a qualified power socket that has been checked and meets the requirements. The load capacity of the socket must not be less than 10A/120 V. Make sure that the voltage of the power supply is the same as that specified on the nameplate of the machine(AC120 V).
·To avoid overheating, covering the heater is prohibited. It is strictly prohibited to place objects on the body.