Rembam Information:
Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

Specifications:
Part number: DT01931
Application:Business/Education/Home/School
Compatible:forHitachi CP-X5550 Hitachi CP-X5555
Hitachi CP-WX5500 Hitachi CP-WX5505
Hitachi CP-WU5500 Hitachi CP-WU5505
Package:
1 bulb with housing
1 Instructions sheet

Installation:
1.Turn off the projector and unplug the power cord.
2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.
3.Loosen the lamp cover screw. Then slide the lamp cover off.
4.Loosen the two screws holding the lamp in place.
5.Hold the lamp as shown and pull it straight out.
6.Gently insert the new lamp. Then tighten its screws.
7.Replace the lamp cover, then tighten its screw.

Notes:
1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.
2.We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.