The protector has over voltage protection, under voltage protection and other functions.The line conductor should meet the relevant current standard value and the load current cannot be greater than the maximum protection current value of the protector.The neutral line N cannot be connected incorrectly and needs to be secure. The zero line N of the protector is directly connected, and there is no disconnect function.
The main feature is that the line has overvoltage or undervoltage, overcurrent condition, the product can cut off the power supply instantaneously, protect the electrical equipment from damage; when the line voltage returns to normal, the protector can work automatically and normally.After the product is powered on, do not touch the live parts to avoid electric shock.
It is mainly used for the protection of over-voltage, under-voltage or over-current in the distribution line of residential household box or the protection of single-phase power equipment.
Suitable for single-phase AC voltage 230V, 50/60Hz, rated working current 63A and below users or loads.This protector has no isolation and short-circuit protection. Please use a small circuit breaker at the front end to protect against isolation and short-circuit. Please disconnect the front-end breaker switch when repairing the circuit.
Low power consumption and long mechanical life.Please note! When the undervoltage breaking time is greater than 0.3 seconds, the protector does not open after the power failure.
ACL 4 Feet Power Cable with 6 Outlets Surge Protector, Flat Rotating Plug, Horizontal Outlets, Black
KWD 11.500
Intermatic Ig2280-Im Surge Protector, 20Ka In/100Ka Sccr Single Phase SPD Type 2 - Indoor Metal Housing (Nema Type 1)
KWD 105
-11%
SurgeX SA-20 Standalone Surge Eliminator - 120 Volt, 20 amp - Advanced Series Mode Surge Protector and EMI/RFI Noise Filter
KWD 199.500
-6%
FHSPD2ULTRA Ultimate Surge Protector,Surge Times Logger,Voltage Display,120/240V,108kA/Phase,2820 Joules (Total)
KWD 33
