Say goodbye to stiff interconnect cables and big loops of coax sticking out of your rig. Easily fit cables into tight spots and route them around corners.
Use this 3 foot PL-259-to-N/M jumper to connect between SO-239 jacks and N-Female jacks on antennas, transmitters, meters, scanners, duplexers or other radio equipment.
Proxicast's UltraFlex-240 has stranded solid copper signal conductors, a flexible aluminum inner shield, a braided outer shield and a soft thermoplastic elastomer (TPE) jacket giving the cable unmatched flexibility. With a minimum bend radius of only 3/4-ths of an inch, UltraFlex-240 cables can go where you want them - not just where the cable wants to go!
UltraFlex-240's 19 strand copper core and double shielded construction deliver the lowest loss of any flexible cable available and increase RF shielding by 50 dB more than typical single-shielded coax). The TPE jacket provides excellent weather resistance for indoor or outdoor applications.
UltraFlex-240 jumpers will be your new favorite coax interconnects.
Proxicast's cable assemblies are made to exacting standards with the highest quality components and 100% tested in our ISO 9001 compliant facilities.
Specifications
• Connector 1: PL-259 Male
• Connector 2: N Male
• Length: 3 feet
• Coax: Low-loss UltraFlex-240 (0.24 in dia) - Black
• Min Bend Radius: 0.75 in
• Impedance: 50 Ohm
• Max VSWR: • Max Insertion Loss: 0.1 dB @ 30 MHz; 0.7 dB @ 3000 MHz
• Outdoor Rated: Yes
• Op. Temp.:-40C to +85C (-40F to +185F)

See the specification sheet for complete details.

Outdoor connections must be weather-proofed. Use Proxicast's Self-Bonding Silicone Tape (part# ANT-900-002) for fast and easy connection sealing with no messy residue.
BUY WITH CONFIDENCE: USA-based Proxicast has been designing and building innovative electronic products since 2000.