Search

Search

5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module

KWD 4.500
Brand
PAMEENCOS
Weight
9 g
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • 【Description】 MCU230 Bus Transceiver SN65HVD230 CAN Communication Module.
  • 【Feature】SN65HVD230 can be used in high interference environments. The device has good transceiver ability at different rates, fully compatible with ISO11898 standard, slope control, reduce radio frequency interference (RFI); Differential receiver with resistance to a wide range of common mode interference and electromagnetic interference (EMI).
  • 【Specification】High input impedance, allowing 120 nodes; Low current waiting mode, typical current is 370μA; Signal transmission rate up to 1Mb/s.
  • 【Safety】With thermal protection, open circuit failure protection function; It has the function of resisting instantaneous interference and protecting bus.

Description

【Mode & Control】The SN65HVD230 has three different operating modes: high speed, slope and wait. Its working mode control can be realized by Rs control pin. The output pin Tx of the CAN controller is connected to the data input terminal D of the SN65HVD230, and the data sent by this CAN node can be transmitted to the CAN network. The receiving pin Rx of the CAN controller is connected to the data output end R of the SN65HVD230 for receiving data. The SN65HVD230 mode option port Rs is connected by a jumper and a slope resistor grounded at one end, and the choice of three operating modes can be realized by hardware mode, where the slope resistor is a potentiometer from 0 to 100kΩ.Package included: 5pcs MCU230 Bus Transceiver SN65HVD230 CAN Communication Module.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}